We specialize in very small micro setscrews (miniature set screws) from M1 to M2.5.
    Nominal diameters of our very small micro set screws (miniature set screws) are M1, M1.2, M1.4, M1.6, M1.7, M2, M2.3, M2.5, and M3. Lengths are 1.0mm, 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5mm, 1.6mm, 1.7mm, 1.8mm, 2.0mm, 2.5mm, 3.0mm, 4.0mm, 5.0mm and 6.0mm. Tip shapes of our very small micro grub screws (miniature grub screws) are flat point, cone point, oval point / round point and cup point (inc. knurled cup and cup-and-cone point). Materials available: Steel, stainless steel   SAIDA Manufacturing Co. Ltd.
197-0831
292 Shimoyotsugi Akiruno-city Tokyo JAPAN
(FAX No.)+81 42-559-0138
 
Return to the previous screen

EXW (EX WORKS) (Excerpt from Incoterms 2010)
GUIDANCE NOTE
This rule may be used irrespective of the mode transport selected and may also be used where more than one mode of transport is employed.  It is suitable for domestic trade, while FCA is usually more appropriate for international trade.
"Ex Works" means that the seller delivers when it places the goods at the disposal of the buyer at the seller's premises or at another named place (i.e., works, factory, warehouse, etc.).  The seller does not need to load the goods on any collecting vehicle, nor does it need to clear the goods for export, where such clearance is applicable.
The parties are well advised to specify as clearly as possible the point within the named place of delivery, as the costs and risks to that point are for the account of the seller.  The buyer bears all costs and risks involved in taking the goods from the agreed point, if any, at the named place of delivery.
EXW represents the minimum obligation for the seller. The rule should be used with care as:
a) The seller has no obligation to the buyer to load the goods, even though in practice the seller may be in a better position to do so.  If the seller does load the goods, it does so at the buyer's risk and expense.  In cases where the seller is in a better position to load the goods, FCA, which obliges the seller to do so at its own risk and expense, is usually more appropriate.
b) A buyer who buys from a seller on an EXW basis for export needs to be aware that the seller has an obligation to provide only such assistance as the buyer may requite to effect that export: the seller is not bound to organize the export clearance.  Buyers are therefore well advised not to use EXW if they cannot directly or indirectly obtain export clearance.
c) The buyer has limited obligations to provide to the seller any information regarding the export of the goods.  However, the seller may need this information for, e.g., taxation or reporting purpose.
 A  THE SELLER'S OBLIGATIONS  B  THE BUYER'S OBLIGATIONS
A1 General obligations of the seller

The seller must provide the goods and the commercial invoice in conformity with the contract of sale and any other evidence of conformity that may be required by the contract.

Any document referred to in A1-A10 may be an equivalent electronic record or procedure if agreed between the parties or customary.
B1 General obligations of the buyer

The buyer must pay the price of the goods as provided in the contract of sale.

Any document referred to in B1-B10 may be an equivalent electronic record or procedure if agreed between the parties or customary.
A2 Licences, authorizations, security clearances and other formalities

Where applicable, the seller must provide the buyer, at the buyer's request, risk and expense, assistance in obtaining any export licence, or other official authorization necessary for the export of the goods.
Where applicable, the seller must provide, at the buyer's request, risk and expense, any information in the possession of the seller that is required for the security clearance of the goods.
B2 Licences, authorizations, security clearances and other formalities

Where applicable, it is up to the buyer to obtain, at its own risk and expense, any export and import licence or other official authorization and carry out all customs formalities for the export of the goods.

Back to the Trading Guide
A3 Contracts of carriage and insurance

a) Contract of carriage
The seller has no obligation to the buyer to make a contract of carriage.

b) Contract of insurance
The seller has no obligation to the buyer to make a contract of insurance. However, the seller must provide the buyer, at the buyer's request, risk, and expense (if any), with information that the buyer needs for obtaining insurance.
B3 Contracts of carriage and insurance

a) Contract of carriage
The buyer has no obligation to the seller to make a contract of carriage.

b) Contract of insurance
The buyer has no obligation to the seller to make a contract of insurance.
A4 Delivery

The seller must deliver the goods by placing them at the disposal of the buyer at the agreed point, if any, at the named place of delivery, not loaded on any collecting vehicle.  If no specific point has been agreed within the named place of delivery, and if there are several points available, the seller may select the point that best suits its purpose.  The seller must deliver the goods on the agreed date or within the agreed period.
B4 Taking delivery

The buyer must take delivery of the goods when A4 and A7 have been complied with.


Back to the Trading Guide
A5 Transfer of risks

The seller bears all risks of loss of or damage to the goods until they have been delivered in accordance with A4 with the exception of loss or damage in the circumstances described in B5.

Back to the Trading Guide
B5 Transfer of risks

The buyer bears all risks of loss of or damage to the goods from the time they have been delivered as envisaged in A4.

If the buyer fails to give notice in accordance with B7, then the buyer bears all risks of loss of or damage to the goods from the agreed date or the expiry date of the agreed period for delivery, provided that the goods have been clearly identified as the contract goods.

A6 Allocation of costs

The seller must pay all costs relating to the goods until they have been delivered in accordance with A4, other than those payable by the buyer as envisaged in B6.

 

 

 

Back to the Trading Guide
B6 Allocation of costs

The buyer must:
a) pay all costs relating to the goods from the time they have been delivered as envisaged in A4;

b) pay any additional costs incurred by failing either to take delivery of the goods when they have been placed at its disposal or to give appropriate notice in accordance with B7, provided that the goods have been clearly identified as the contract goods;

c) pay, where applicable, all duties, taxes and other charges, as well as the costs of carrying out customs formalities payable upon export; and

d) reimburse all costs and charges incurred incurred by the seller in providing assistance as envisaged in A2.
A7 Notices to the buyer

The seller must give the buyer any notice needed to enable the buyer to take delivery of the goods.
B7 Notices to the seller

The buyer must, whenever it is entitled to determine the time within as agreed period and/or the point of taking delivery within the named place, give the seller sufficient notice thereof.
A8 Delivery document

The seller has no obligation to the buyer.
B8 Proof of delivery

The buyer must provide the seller with appropriate evidence of having taken delivery.
A9 Checking-packing-marking

The seller must pay the costs of those checking operations (such as checking quality, measuring, weighing, counting) that are necessary for the purpose of delivering the goods in accordance with A4.

The seller must, at its own expense, package the goods, unless it is usual for the particular trade to transport the type of goods sold unpackaged.  The seller may package the goods in the manner appropriate for their transport, unless the buyer has notified the seller of specific packaging requirements before the contract of sale is concluded.  ackaging is to be marked appropriately.
B9 Inspection of goods

The buyer must pay the costs of any mandatory pre-shipment inspection, including inspection mandated by the authorities of the country of export.

 

 

Back to the Trading Guide
A10 Assistance with information and related costs

The seller must, where applicable, in a timely manner, provide to or render assistance in obtaining for the buyer, at the buyer's request, risk and expense, any documents and information, including security-related information, that the buyer needs for the export and/or import of the goods and/or for their transport to the final destination.
B10 Assistance with information and related costs

The buyer must, in a timely manner, advise the seller of any security information requirements so that the seller may comply with A10.

The buyer must reimburse the seller for all costs and charges incurred by the seller in providing or rendering assistance in obtaining documents and information as envisaged in A10.